1. Disassemble the smart thru axle.
2. Turn the bayonet lock (3) counter-clockwise past the release sign and the bayonet lock is automatically released.
3. Use a standard needle-nosed tool (such as a Torx T5 screwdriver) to push and hold the button (5) of the smart thru-axle for at least 5 seconds until the LED (4) starts to blink.
4. Press and hold the button (2) of the handlebar unit for at least 5 seconds until the LED (1) starts to blink. When both LEDs go out at the same time, the Bluetooth® connection has been established.
5. Check the connection by shifting the Classified Powershift hub using the shifter or the satellite buttons.
The LED of the handlebar unit and the LED of the smart thru axle both briefly light up when shifting.
6. Reinstall the thru axle on the bike. Make sure you tighten the thru axle to 10Nm or hand tight.
If you experience pairing issues, you can check our troubleshooting guide.