Recharging the battery of the ringshifter

The battery of the ringshifter cannot be replaced, but it can be recharged. You can use a fully charged battery for 4 to 12 months, depending on usage. The more you ride and the more you shift, the sooner the battery will need to be recharged. Recharging takes about 2 hours at room temperature.

NOTE: During recharging, the flatbar handlebar unit must be dry, and the unit must be recharged in a dry place.


1. Insert the pogo connector in the opening (1) of the ringshifter (3).

2. Connect the USB charger to the power mains. The LED (2) will blink green while charging. Once the battery is fully charged, the LED will remain steady green.

WARNING: Only use USB chargers that are compliant with IEC/UL 60950-1 or IEC/UL 62368-1 standards.

3. Disconnect the pogo connector from the ringshifter

4. Remove the USB charger from the power mains.

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request