Our POWERSHIFT system can be installed on every frame provided it has the following specifications:
For Road & Gravel applications using the 142mm Powershift hub: Rear hub width of 142mm. Front hub width of 100mm. Thru Axle diameter is 12mm (both front & rear). Compatible with post-mount and flatmount disc brakes (all sizes) - not compatible with rim brakes. No adjustment to your frame or dropout is needed to install a Classified wheel or POWERSHIFT system on your bike. For Road & Gravel setup with the 142mm Powershift hub*, the front chainring size must be at least 40T. *(for E-bikes, the maximal size of cassette to be used is 11-34, so 11-40 is not compatible with E-bike applications)
For MTB applications using the 148mm Powershift boost hub: Rear hub width of 148mm. Front hub width of 110mm. Thru Axle diameter is 12mm for the rear and 15mm for the front thru-axle. Compatible with post-mount and flatmount disc brakes (all sizes) - not compatible with rim brakes. For MTB setup with the 148mm Powershift boost hub, the front chainring size must be at least 30T.