Check the battery status of the ringshifter

The flatbar handlebar unit is equipped with an LED. The color of the LED indicates the battery status. You can check the colour of the LEDs while shifting. However, for safety it is recommended to get off the bicycle and perform the following procedure.



1. Push the flatbar handlebar unit (2) up or down very briefly (for less than 0.3 seconds).

2. Observe the color of the LED (1):


LED colour Battery status
Green, for 0.2 seconds The battery is at more than 25% charge.
Red, for 0.2 seconds The battery is between 15% and 25% charge
Red, blinking for 1.5 seconds The battery is at less than 15% charge.
No color The battery is completely flat.

Related to

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request